[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [ethmac] About TxStartFrm_wb ..



Not true.

The equation says:
  if(TxBDReady & ~StartOccured & (TxBufferFull | TxLengthEq0))
    TxStartFrm_wb <=#Tp 1'b1;

It means that when you send small packets (smaller then the fifo size),
transmission starts as soon as the whole packet is written to fifo
(TxLengthEq0 = 1).

Regards,
	Igor


> -----Original Message-----
> From: owner-ethmac@opencores.org [mailto:owner-ethmac@opencores.org]
On
> Behalf Of A¢Ò ¡¾a¢¥e(Cho
> Sent: Thursday, March 20, 2003 9:14 AM
> To: ethmac@opencores.org
> Subject: RE: [ethmac] About TxStartFrm_wb ..
> 
> 
> If I change the fifo size and the changed fifo full size is bigger
than
> minimum frame length, the frame may be not sent.
> In my case, the fifo size is so small to operate data streaming such
as
> mpeg4..
> As you know, data streaming is many bus iteration for data
transaction.
> Moreover my bus environment is AMBA. So.. not short over head..
> 
> 
> > -----Original Message-----
> > From: owner-ethmac@opencores.org [mailto:owner-ethmac@opencores.org]
> On
> > Behalf Of Igor Mohor(opencores)
> > Sent: Thursday, March 20, 2003 4:30 PM
> > To: ethmac@opencores.org
> > Subject: RE: [ethmac] About TxStartFrm_wb ..
> >
> >
> > Nop.
> >
> > First tx buffer must be filled up (full), then transmission begins.
> >
> > Regards,
> > 	Igor
> >
> > > -----Original Message-----
> > > From: owner-ethmac@opencores.org [mailto:owner-
ethmac@opencores.org]
> > On
> > > Behalf Of icyman@catholic.or.kr
> > > Sent: Thursday, March 20, 2003 9:48 AM
> > > To: ethmac@opencores.org
> > > Subject: [ethmac] About TxStartFrm_wb ..
> > >
> > > This is only my point of view.
> > >
> > > The TxStartFrm_wb register must be syncronized to minimum frame
> > > length register rather than TxBufferFull signal.. isn't it??
> > >
> > > The TxStartFrm_wb register is used to start transmit frame within
> > > tx_fifo.
> > > --
> > > To unsubscribe from ethmac mailing list please visit
> > > http://www.opencores.org/mailinglists.shtml
> >
> > --
> > To unsubscribe from ethmac mailing list please visit
> > http://www.opencores.org/mailinglists.shtml
> 
> 
> --
> To unsubscribe from ethmac mailing list please visit
> http://www.opencores.org/mailinglists.shtml


--
To unsubscribe from ethmac mailing list please visit http://www.opencores.org/mailinglists.shtml