Packages changed: AppStream (0.14.4 -> 0.14.6) grub2 kernel-source (5.14.11 -> 5.14.14) logrotate mpg123 (1.29.1 -> 1.29.2) ncurses (6.2.20211002 -> 6.3.20211021) parted pcre2 (10.37 -> 10.38) plasma5-openSUSE podman (3.3.1 -> 3.4.1) polkit python-Mako (1.1.4 -> 1.1.5) python-cryptography (3.3.2 -> 3.4.8) python-jsonpatch python-numpy python-pandas (1.3.3 -> 1.3.4) python38 python38-core qca-qt5 rpm (4.16.1.3 -> 4.17.0) rpm-config-SUSE (0.g83 -> 0.g89) suse-module-tools (16.0.11 -> 16.0.13) systemd-rpm-macros transactional-update (3.5.6 -> 3.6.0) u-boot-rpiarm64 === Details === ==== AppStream ==== Version update (0.14.4 -> 0.14.6) Subpackages: libAppStreamQt2 libappstream4 - Update to 0.14.6. Check the NEWS file for the list of changes. - Only install the license files once. ==== grub2 ==== Subpackages: grub2-arm64-efi grub2-snapper-plugin - Fix installation on usrmerged s390x ==== kernel-source ==== Version update (5.14.11 -> 5.14.14) - Update patches.kernel.org/5.14.14-060-x86-fpu-Mask-out-the-invalid-MXCSR-bits-prope.patch (bsc#1012628 bsc#1191855). - commit 2b5383f - Linux 5.14.14 (bsc#1012628). - ALSA: usb-audio: Add quirk for VF0770 (bsc#1012628). - ALSA: pcm: Workaround for a wrong offset in SYNC_PTR compat ioctl (bsc#1012628). - ALSA: usb-audio: Fix a missing error check in scarlett gen2 mixer (bsc#1012628). - ALSA: seq: Fix a potential UAF by wrong private_free call order (bsc#1012628). - ALSA: hda/realtek: Enable 4-speaker output for Dell Precision 5560 laptop (bsc#1012628). - ALSA: hda - Enable headphone mic on Dell Latitude laptops with ALC3254 (bsc#1012628). - ALSA: hda/realtek: Complete partial device name to avoid ambiguity (bsc#1012628). - ALSA: hda/realtek: Add quirk for Clevo X170KM-G (bsc#1012628). - ALSA: hda/realtek - ALC236 headset MIC recording issue (bsc#1012628). - ALSA: hda/realtek: Add quirk for TongFang PHxTxX1 (bsc#1012628). - ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo 13s Gen2 (bsc#1012628). - ALSA: hda/realtek: Fix the mic type detection issue for ASUS G551JW (bsc#1012628). - platform/x86: gigabyte-wmi: add support for B550 AORUS ELITE AX V2 (bsc#1012628). - platform/x86: amd-pmc: Add alternative acpi id for PMC controller (bsc#1012628). - spi: atmel: Fix PDC transfer setup bug (bsc#1012628). - mtd: rawnand: qcom: Update code word value for raw read (bsc#1012628). - nds32/ftrace: Fix Error: invalid operands (*UND* and *UND* sections) for `^' (bsc#1012628). - dm: fix mempool NULL pointer race when completing IO (bsc#1012628). - ACPI: PM: Include alternate AMDI0005 id in special behaviour (bsc#1012628). - dm rq: don't queue request to blk-mq during DM suspend (bsc#1012628). - s390: fix strrchr() implementation (bsc#1012628). - clk: socfpga: agilex: fix duplicate s2f_user0_clk (bsc#1012628). - csky: don't let sigreturn play with priveleged bits of status register (bsc#1012628). - csky: Fixup regs.sr broken in ptrace (bsc#1012628). - drm/fbdev: Clamp fbdev surface size if too large (bsc#1012628). - arm64/hugetlb: fix CMA gigantic page order for non-4K PAGE_SIZE (bsc#1012628). - drm/nouveau/fifo: Reinstate the correct engine bit programming (bsc#1012628). - drm/msm: Do not run snapshot on non-DPU devices (bsc#1012628). - drm/msm: Avoid potential overflow in timeout_to_jiffies() (bsc#1012628). - btrfs: unlock newly allocated extent buffer after error (bsc#1012628). - btrfs: deal with errors when replaying dir entry during log replay (bsc#1012628). - btrfs: deal with errors when adding inode reference during log replay (bsc#1012628). - btrfs: check for error when looking up inode during dir entry replay (bsc#1012628). - btrfs: update refs for any root except tree log roots (bsc#1012628). - btrfs: fix abort logic in btrfs_replace_file_extents (bsc#1012628). - module: fix clang CFI with MODULE_UNLOAD=n (bsc#1012628). - x86/resctrl: Free the ctrlval arrays when domain_setup_mon_state() fails (bsc#1012628). - mei: me: add Ice Lake-N device id (bsc#1012628). - mei: hbm: drop hbm responses on early shutdown (bsc#1012628). - USB: xhci: dbc: fix tty registration race (bsc#1012628). - xhci: guard accesses to ep_state in xhci_endpoint_reset() (bsc#1012628). - xhci: add quirk for host controllers that don't update endpoint DCS (bsc#1012628). - xhci: Fix command ring pointer corruption while aborting a command (bsc#1012628). - xhci: Enable trust tx length quirk for Fresco FL11 USB controller (bsc#1012628). - cb710: avoid NULL pointer subtraction (bsc#1012628). - efi/cper: use stack buffer for error record decoding (bsc#1012628). - efi: Change down_interruptible() in virt_efi_reset_system() to down_trylock() (bsc#1012628). - usb: musb: dsps: Fix the probe error path (bsc#1012628). - Input: xpad - add support for another USB ID of Nacon GC-100 (bsc#1012628). - USB: serial: qcserial: add EM9191 QDL support (bsc#1012628). - USB: serial: option: add Quectel EC200S-CN module support (bsc#1012628). - USB: serial: option: add Telit LE910Cx composition 0x1204 (bsc#1012628). - USB: serial: option: add prod. id for Quectel EG91 (bsc#1012628). - misc: fastrpc: Add missing lock before accessing find_vma() (bsc#1012628). - virtio: write back F_VERSION_1 before validate (bsc#1012628). - EDAC/armada-xp: Fix output of uncorrectable error counter (bsc#1012628). - nvmem: Fix shift-out-of-bound (UBSAN) with byte size cells (bsc#1012628). - virtio-blk: remove unneeded "likely" statements (bsc#1012628). - Revert "virtio-blk: Add validation for block size in config space" (bsc#1012628). - x86/Kconfig: Do not enable AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT automatically (bsc#1012628). - powerpc/xive: Discard disabled interrupts in get_irqchip_state() (bsc#1012628). - iio: adc: aspeed: set driver data when adc probe (bsc#1012628). - drivers: bus: simple-pm-bus: Add support for probing simple bus only devices (bsc#1012628). - driver core: Reject pointless SYNC_STATE_ONLY device links (bsc#1012628). - iio: adc: ad7192: Add IRQ flag (bsc#1012628). - iio: adc: ad7780: Fix IRQ flag (bsc#1012628). - iio: adc: ad7793: Fix IRQ flag (bsc#1012628). - iio: adis16480: fix devices that do not support sleep mode (bsc#1012628). - iio: adc128s052: Fix the error handling path of 'adc128_probe()' (bsc#1012628). - iio: adc: max1027: Fix wrong shift with 12-bit devices (bsc#1012628). - iio: adis16475: fix deadlock on frequency set (bsc#1012628). - iio: mtk-auxadc: fix case IIO_CHAN_INFO_PROCESSED (bsc#1012628). - iio: light: opt3001: Fixed timeout error when 0 lux (bsc#1012628). - iio: accel: fxls8962af: return IRQ_HANDLED when fifo is flushed (bsc#1012628). - iio: adc: max1027: Fix the number of max1X31 channels (bsc#1012628). - iio: ssp_sensors: add more range checking in ssp_parse_dataframe() (bsc#1012628). - iio: ssp_sensors: fix error code in ssp_print_mcu_debug() (bsc#1012628). - Input: resistive-adc-touch - fix division by zero error on z1 == 0 (bsc#1012628). - eeprom: 93xx46: Add SPI device ID table (bsc#1012628). - eeprom: 93xx46: fix MODULE_DEVICE_TABLE (bsc#1012628). - eeprom: at25: Add SPI ID table (bsc#1012628). - fpga: ice40-spi: Add SPI device ID table (bsc#1012628). - iio: dac: ti-dac5571: fix an error code in probe() (bsc#1012628). - tracing: Fix missing osnoise tracer on max_latency (bsc#1012628). - tee: optee: Fix missing devices unregister during optee_remove (bsc#1012628). - ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address (bsc#1012628). - ARM: dts: bcm283x: Fix VEC address for BCM2711 (bsc#1012628). - ARM: dts: bcm2711: fix MDIO #address- and #size-cells (bsc#1012628). - firmware: arm_ffa: Fix __ffa_devices_unregister (bsc#1012628). - firmware: arm_ffa: Add missing remove callback to ffa_bus_type (bsc#1012628). - ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states (bsc#1012628). - ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting (bsc#1012628). - clk: renesas: rzg2l: Fix clk status function (bsc#1012628). - nvme-pci: Fix abort command id (bsc#1012628). - sctp: account stream padding length for reconf chunk (bsc#1012628). - gpio: 74x164: Add SPI device ID table (bsc#1012628). - gpio: pca953x: Improve bias setting (bsc#1012628). - net: arc: select CRC32 (bsc#1012628). - net: korina: select CRC32 (bsc#1012628). - net/smc: improved fix wait on already cleared link (bsc#1012628). - net/mlx5e: Fix memory leak in mlx5_core_destroy_cq() error path (bsc#1012628). - net/mlx5e: Mutually exclude RX-FCS and RX-port-timestamp (bsc#1012628). - net/mlx5e: Switchdev representors are not vlan challenged (bsc#1012628). - net: stmmac: fix get_hw_feature() on old hardware (bsc#1012628). - net: phy: Do not shutdown PHYs in READY state (bsc#1012628). - net: dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's (bsc#1012628). - net: dsa: microchip: Added the condition for scheduling ksz_mib_read_work (bsc#1012628). - net: dsa: fix spurious error message when unoffloaded port leaves bridge (bsc#1012628). - net: encx24j600: check error in devm_regmap_init_encx24j600 (bsc#1012628). - ethernet: s2io: fix setting mac address during resume (bsc#1012628). - vhost-vdpa: Fix the wrong input in config_cb (bsc#1012628). - nfc: fix error handling of nfc_proto_register() (bsc#1012628). - NFC: digital: fix possible memory leak in digital_tg_listen_mdaa() (bsc#1012628). - NFC: digital: fix possible memory leak in digital_in_send_sdd_req() (bsc#1012628). - pata_legacy: fix a couple uninitialized variable bugs (bsc#1012628). - ata: ahci_platform: fix null-ptr-deref in ahci_platform_enable_regulators() (bsc#1012628). - mlxsw: thermal: Fix out-of-bounds memory accesses (bsc#1012628). - platform/mellanox: mlxreg-io: Fix argument base in kstrtou32() call (bsc#1012628). - platform/mellanox: mlxreg-io: Fix read access of n-bytes size attributes (bsc#1012628). - spi: spidev: Add SPI ID table (bsc#1012628). - spi: bcm-qspi: clear MSPI spifie interrupt during probe (bsc#1012628). - drm/panel: olimex-lcd-olinuxino: select CRC32 (bsc#1012628). - drm/edid: In connector_bad_edid() cap num_of_ext by num_blocks read (bsc#1012628). - drm/msm: Fix null pointer dereference on pointer edp (bsc#1012628). - drm/msm/mdp5: fix cursor-related warnings (bsc#1012628). - drm/msm/submit: fix overflow check on 64-bit architectures (bsc#1012628). - drm/msm/a6xx: Track current ctx by seqno (bsc#1012628). - drm/msm/a4xx: fix error handling in a4xx_gpu_init() (bsc#1012628). - drm/msm/a3xx: fix error handling in a3xx_gpu_init() (bsc#1012628). - drm/msm/dsi: dsi_phy_14nm: Take ready-bit into account in poll_for_ready (bsc#1012628). - drm/msm/dsi: Fix an error code in msm_dsi_modeset_init() (bsc#1012628). - drm/msm/dsi: fix off by one in dsi_bus_clk_enable error handling (bsc#1012628). - acpi/arm64: fix next_platform_timer() section mismatch error (bsc#1012628). - platform/x86: intel_scu_ipc: Fix busy loop expiry time (bsc#1012628). - mqprio: Correct stats in mqprio_dump_class_stats() (bsc#1012628). - mptcp: fix possible stall on recvmsg() (bsc#1012628). - qed: Fix missing error code in qed_slowpath_start() (bsc#1012628). - r8152: select CRC32 and CRYPTO/CRYPTO_HASH/CRYPTO_SHA256 (bsc#1012628). - ice: fix locking for Tx timestamp tracking flush (bsc#1012628). - block/rnbd-clt-sysfs: fix a couple uninitialized variable bugs (bsc#1012628). - nfp: flow_offload: move flow_indr_dev_register from app init to app start (bsc#1012628). - net: mscc: ocelot: make use of all 63 PTP timestamp identifiers (bsc#1012628). - net: mscc: ocelot: avoid overflowing the PTP timestamp FIFO (bsc#1012628). - net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skb (bsc#1012628). - net: mscc: ocelot: deny TX timestamping of non-PTP packets (bsc#1012628). - net: mscc: ocelot: cross-check the sequence id from the timestamp FIFO with the skb PTP header (bsc#1012628). - net: dsa: felix: break at first CPU port during init and teardown (bsc#1012628). - ionic: don't remove netdev->dev_addr when syncing uc list (bsc#1012628). - commit 6859230 - media: firewire: firedtv-avc: fix a buffer overflow in avc_ca_pmt() (CVE-2021-3542 bsc#1184673). - commit 08ab8da - x86/fpu: Mask out the invalid MXCSR bits properly (x86_32 breakage). - commit 565cd48 - rpm/kernel-obs-build.spec.in: reduce initrd functionality For building in OBS, we always build inside a virtual machine that gets a new, freshly created scratch filesystem image. So we do not need to handle fscks because that ain't gonna happen, as well as not we do not need to handle microcode update in the initrd as these only can be run on the host system anyway. We can also strip and hardlink as an additional optimisation that should not significantly hurt. - commit c72c6fc - Update upstream commit id for rtw89 patch (bsc#1191321) - commit 8dccb66 - Linux 5.14.13 (bsc#1012628). - hwmon: (pmbus/ibm-cffps) max_power_out swap changes (bsc#1012628). - io_uring: kill fasync (bsc#1012628). - sched: Always inline is_percpu_thread() (bsc#1012628). - perf/core: fix userpage->time_enabled of inactive events (bsc#1012628). - scsi: qla2xxx: Fix excessive messages during device logout (bsc#1012628). - scsi: virtio_scsi: Fix spelling mistake "Unsupport" -> "Unsupported" (bsc#1012628). - scsi: ses: Fix unsigned comparison with less than zero (bsc#1012628). - drm/amdgpu: fix gart.bo pin_count leak (bsc#1012628). - net: sun: SUNVNET_COMMON should depend on INET (bsc#1012628). - vboxfs: fix broken legacy mount signature checking (bsc#1012628). - net: bgmac-platform: handle mac-address deferral (bsc#1012628). - mac80211: check return value of rhashtable_init (bsc#1012628). - net: prevent user from passing illegal stab size (bsc#1012628). - hwmon: (ltc2947) Properly handle errors when looking for the external clock (bsc#1012628). - m68k: Handle arrivals of multiple signals correctly (bsc#1012628). - pinctrl: qcom: sc7280: Add PM suspend callbacks (bsc#1012628). - mac80211: Drop frames from invalid MAC address in ad-hoc mode (bsc#1012628). - netfilter: nf_nat_masquerade: defer conntrack walk to work queue (bsc#1012628). - netfilter: nf_nat_masquerade: make async masq_inet6_event handling generic (bsc#1012628). - KVM: arm64: nvhe: Fix missing FORCE for hyp-reloc.S build rule (bsc#1012628). - ASoC: SOF: loader: release_firmware() on load failure to avoid batching (bsc#1012628). - HID: wacom: Add new Intuos BT (CTL-4100WL/CTL-6100WL) device IDs (bsc#1012628). - netfilter: ip6_tables: zero-initialize fragment offset (bsc#1012628). - HID: apple: Fix logical maximum and usage maximum of Magic Keyboard JIS (bsc#1012628). - ALSA: usb-audio: Unify mixer resume and reset_resume procedure (bsc#1012628). - ALSA: oxfw: fix transmission method for Loud models based on OXFW971 (bsc#1012628). - ASoC: Intel: sof_sdw: tag SoundWire BEs as non-atomic (bsc#1012628). - ext4: correct the error path of ext4_write_inline_data_end() (bsc#1012628). - ext4: check and update i_disksize properly (bsc#1012628). - commit ab3ca44 - kernel-spec-macros: Since rpm 4.17 %verbose is unusable (bsc#1191229). The semantic changed in an incompatible way so invoking the macro now causes a build failure. - commit 3e55f55 - Linux 5.14.12 (bsc#1012628). - dsa: tag_dsa: Fix mask for trunked packets (bsc#1012628). - x86/hpet: Use another crystalball to evaluate HPET usability (bsc#1012628). - x86/entry: Clear X86_FEATURE_SMAP when CONFIG_X86_SMAP=n (bsc#1012628). - x86/entry: Correct reference to intended CONFIG_64_BIT (bsc#1012628). - x86/fpu: Restore the masking out of reserved MXCSR bits (bsc#1012628). - x86/sev: Return an error on a returned non-zero SW_EXITINFO1[31:0] (bsc#1012628). - x86/Kconfig: Correct reference to MWINCHIP3D (bsc#1012628). - x86/platform/olpc: Correct ifdef symbol to intended CONFIG_OLPC_XO15_SCI (bsc#1012628). - pseries/eeh: Fix the kdump kernel crash during eeh_pseries_init (bsc#1012628). - powerpc/32s: Fix kuap_kernel_restore() (bsc#1012628). - powerpc/64s: Fix unrecoverable MCE calling async handler from NMI (bsc#1012628). - powerpc/traps: do not enable irqs in _exception (bsc#1012628). - powerpc/64s: fix program check interrupt emergency stack path (bsc#1012628). - powerpc/bpf ppc32: Fix BPF_SUB when imm == 0x80000000 (bsc#1012628). - powerpc/bpf ppc32: Do not emit zero extend instruction for 64-bit BPF_END (bsc#1012628). - powerpc/bpf ppc32: Fix JMP32_JSET_K (bsc#1012628). - powerpc/bpf ppc32: Fix ALU32 BPF_ARSH operation (bsc#1012628). - powerpc/bpf: Fix BPF_SUB when imm == 0x80000000 (bsc#1012628). - powerpc/bpf: Fix BPF_MOD when imm == 1 (bsc#1012628). - objtool: Make .altinstructions section entry size consistent (bsc#1012628). - objtool: Remove reloc symbol type checks in get_alt_entry() (bsc#1012628). - scsi: iscsi: Fix iscsi_task use after free (bsc#1012628). - RISC-V: Include clone3() on rv32 (bsc#1012628). - i2c: mlxcpld: Modify register setting for 400KHz frequency (bsc#1012628). - i2c: mlxcpld: Fix criteria for frequency setting (bsc#1012628). - bpf, s390: Fix potential memory leak about jit_data (bsc#1012628). - riscv/vdso: make arch_setup_additional_pages wait for mmap_sem for write killable (bsc#1012628). - riscv/vdso: Move vdso data page up front (bsc#1012628). - riscv/vdso: Refactor asm/vdso.h (bsc#1012628). - RISC-V: Fix VDSO build for !MMU (bsc#1012628). - riscv: explicitly use symbol offsets for VDSO (bsc#1012628). - i2c: mediatek: Add OFFSET_EXT_CONF setting back (bsc#1012628). - i2c: acpi: fix resource leak in reconfiguration device addition (bsc#1012628). - powerpc/iommu: Report the correct most efficient DMA mask for PCI devices (bsc#1012628). - net: prefer socket bound to interface when not in VRF (bsc#1012628). - iavf: fix double unlock of crit_lock (bsc#1012628). - i40e: Fix freeing of uninitialized misc IRQ vector (bsc#1012628). - i40e: fix endless loop under rtnl (bsc#1012628). - gve: report 64bit tx_bytes counter from gve_handle_report_stats() (bsc#1012628). - gve: fix gve_get_stats() (bsc#1012628). - rtnetlink: fix if_nlmsg_stats_size() under estimation (bsc#1012628). - gve: Properly handle errors in gve_assign_qpl (bsc#1012628). - gve: Avoid freeing NULL pointer (bsc#1012628). - gve: Correct available tx qpl check (bsc#1012628). - net: stmmac: trigger PCS EEE to turn off on link down (bsc#1012628). - net: pcs: xpcs: fix incorrect steps on disable EEE (bsc#1012628). - drm/nouveau/debugfs: fix file release memory leak (bsc#1012628). - drm/nouveau/kms/nv50-: fix file release memory leak (bsc#1012628). - drm/nouveau: avoid a use-after-free when BO init fails (bsc#1012628). - video: fbdev: gbefb: Only instantiate device when built for IP32 (bsc#1012628). - drm/panel: abt-y030xx067a: yellow tint fix (bsc#1012628). - drm/nouveau/fifo/ga102: initialise chid on return from channel creation (bsc#1012628). - drm/sun4i: dw-hdmi: Fix HDMI PHY clock setup (bsc#1012628). - bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893 (bsc#1012628). - perf jevents: Free the sys_event_tables list after processing entries (bsc#1012628). - drm/amdgpu: handle the case of pci_channel_io_frozen only in amdgpu_pci_resume (bsc#1012628). - drm/amdkfd: fix a potential ttm->sg memory leak (bsc#1012628). - ARM: defconfig: gemini: Restore framebuffer (bsc#1012628). - netlink: annotate data races around nlk->bound (bsc#1012628). - net: pcs: xpcs: fix incorrect CL37 AN sequence (bsc#1012628). - net: sfp: Fix typo in state machine debug string (bsc#1012628). - net/sched: sch_taprio: properly cancel timer from taprio_destroy() (bsc#1012628). - net: bridge: fix under estimation in br_get_linkxstats_size() (bsc#1012628). - net: bridge: use nla_total_size_64bit() in br_get_linkxstats_size() (bsc#1012628). - afs: Fix afs_launder_page() to set correct start file position (bsc#1012628). - netfs: Fix READ/WRITE confusion when calling iov_iter_xarray() (bsc#1012628). - drm/i915/bdb: Fix version check (bsc#1012628). - drm/i915/tc: Fix TypeC port init/resume time sanitization (bsc#1012628). - drm/i915/jsl: Add W/A 1409054076 for JSL (bsc#1012628). - drm/i915/audio: Use BIOS provided value for RKL HDA link (bsc#1012628). - ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence (bsc#1012628). - dt-bindings: drm/bridge: ti-sn65dsi86: Fix reg value (bsc#1012628). - arm64: dts: ls1028a: fix eSDHC2 node (bsc#1012628). - arm64: dts: imx8mm-kontron-n801x-som: do not allow to switch off buck2 (bsc#1012628). - arm64: dts: imx8: change the spi-nor tx (bsc#1012628). - ARM: dts: imx: change the spi-nor tx (bsc#1012628). - ptp_pch: Load module automatically if ID matches (bsc#1012628). - powerpc/fsl/dts: Fix phy-connection-type for fm1mac3 (bsc#1012628). - netfilter: nf_tables: honor NLM_F_CREATE and NLM_F_EXCL in event notification (bsc#1012628). - MIPS: Revert "add support for buggy MT7621S core detection" (bsc#1012628). - net: stmmac: dwmac-rk: Fix ethernet on rk3399 based devices (bsc#1012628). - net: mscc: ocelot: fix VCAP filters remaining active after being deleted (bsc#1012628). - net_sched: fix NULL deref in fifo_set_limit() (bsc#1012628). - libbpf: Fix memory leak in strset (bsc#1012628). - phy: mdio: fix memory leak (bsc#1012628). - libbpf: Fix segfault in light skeleton for objects without BTF (bsc#1012628). - net/mlx5e: Fix the presented RQ index in PTP stats (bsc#1012628). - net/mlx5: Fix setting number of EQs of SFs (bsc#1012628). - net/mlx5: Fix length of irq_index in chars (bsc#1012628). - net/mlx5: Avoid generating event after PPS out in Real time mode (bsc#1012628). - net/mlx5: Force round second at 1PPS out start time (bsc#1012628). - net/mlx5: E-Switch, Fix double allocation of acl flow counter (bsc#1012628). - net/mlx5e: Keep the value for maximum number of channels in-sync (bsc#1012628). - net/mlx5e: IPSEC RX, enable checksum complete (bsc#1012628). - bpf: Fix integer overflow in prealloc_elems_and_freelist() (bsc#1012628). - soc: ti: omap-prm: Fix external abort for am335x pruss (bsc#1012628). - bpf, arm: Fix register clobbering in div/mod implementation (bsc#1012628). - netfilter: nf_tables: reverse order in rule replacement expansion (bsc#1012628). - netfilter: nf_tables: add position handle in event notification (bsc#1012628). - netfilter: conntrack: fix boot failure with nf_conntrack.enable_hooks=1 (bsc#1012628). - iwlwifi: pcie: add configuration of a Wi-Fi adapter on Dell XPS 15 (bsc#1012628). - xtensa: call irqchip_init only when CONFIG_USE_OF is selected (bsc#1012628). - xtensa: use CONFIG_USE_OF instead of CONFIG_OF (bsc#1012628). - arm64: dts: qcom: pm8150: use qcom,pm8998-pon binding (bsc#1012628). - ath5k: fix building with LEDS=m (bsc#1012628). - PCI: hv: Fix sleep while in non-sleep context when removing child devices from the bus (bsc#1012628). - ARM: dts: imx6qdl-pico: Fix Ethernet support (bsc#1012628). - ARM: dts: imx: Fix USB host power regulator polarity on M53Menlo (bsc#1012628). - ARM: dts: imx: Add missing pinctrl-names for panel on M53Menlo (bsc#1012628). - soc: qcom: mdt_loader: Drop PT_LOAD check on hash segment (bsc#1012628). - iwlwifi: mvm: Fix possible NULL dereference (bsc#1012628). - ARM: at91: pm: do not panic if ram controllers are not enabled (bsc#1012628). - Revert "arm64: dts: qcom: sc7280: Fixup the cpufreq node" (bsc#1012628). - ARM: dts: qcom: apq8064: Use 27MHz PXO clock as DSI PLL reference (bsc#1012628). - soc: qcom: socinfo: Fixed argument passed to platform_set_data() (bsc#1012628). - bus: ti-sysc: Add break in switch statement in sysc_init_soc() (bsc#1012628). - riscv: Flush current cpu icache before other cpus (bsc#1012628). - scsi: ufs: core: Fix task management completion (bsc#1012628). - ARM: dts: qcom: apq8064: use compatible which contains chipid (bsc#1012628). - ARM: dts: imx6dl-yapp4: Fix lp5562 LED driver probe (bsc#1012628). - ARM: dts: omap3430-sdp: Fix NAND device node (bsc#1012628). - xen/balloon: fix cancelled balloon action (bsc#1012628). - SUNRPC: fix sign error causing rpcsec_gss drops (bsc#1012628). - nfsd4: Handle the NFSv4 READDIR 'dircount' hint being zero (bsc#1012628). - nfsd: fix error handling of register_pernet_subsys() in init_nfsd() (bsc#1012628). - ovl: fix IOCB_DIRECT if underlying fs doesn't support direct IO (bsc#1012628). - ovl: fix missing negative dentry check in ovl_rename() (bsc#1012628). - fbdev: simplefb: fix Kconfig dependencies (bsc#1012628). - Update config files. - mmc: sdhci-of-at91: replace while loop with read_poll_timeout (bsc#1012628). - mmc: sdhci-of-at91: wait for calibration done before proceed (bsc#1012628). - mmc: meson-gx: do not use memcpy_to/fromio for dram-access-quirk (bsc#1012628). - xen/privcmd: fix error handling in mmap-resource processing (bsc#1012628). - drm/i915: Extend the async flip VT-d w/a to skl/bxt (bsc#1012628). - drm/i915: Fix runtime pm handling in i915_gem_shrink (bsc#1012628). - drm/amd/display: Fix DCN3 B0 DP Alt Mapping (bsc#1012628). - drm/amd/display: Fix detection of 4 lane for DPALT (bsc#1012628). - drm/amd/display: Limit display scaling to up to 4k for DCN 3.1 (bsc#1012628). - drm/nouveau/ga102-: support ttm buffer moves via copy engine (bsc#1012628). - drm/nouveau/kms/tu102-: delay enabling cursor until after assign_windows (bsc#1012628). - drm/amdgpu: During s0ix don't wait to signal GFXOFF (bsc#1012628). - drm/amd/display: USB4 bring up set correct address (bsc#1012628). - drm/amd/display: Fix B0 USB-C DP Alt mode (bsc#1012628). - usb: typec: tipd: Remove dependency on "connector" child fwnode (bsc#1012628). - usb: typec: tcpm: handle SRC_STARTUP state if cc changes (bsc#1012628). - usb: typec: tcpci: don't handle vSafe0V event if it's not enabled (bsc#1012628). - USB: cdc-acm: fix break reporting (bsc#1012628). - USB: cdc-acm: fix racy tty buffer accesses (bsc#1012628). - usb: gadget: f_uac2: fixed EP-IN wMaxPacketSize (bsc#1012628). - usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle (bsc#1012628). - usb: cdc-wdm: Fix check for WWAN (bsc#1012628). - Partially revert "usb: Kconfig: using select for USB_COMMON dependency" (bsc#1012628). - Update config files. - commit 7246625 - rtw89: add Realtek 802.11ax driver (bsc#1191321). - commit 4c399ab - Enable CONFIG_RTW88_DEBUG and CONFIG_RTW89_DEBUG on debug flavors (bsc#1191321) - commit a76143b ==== logrotate ==== - Add patch: * logrotate-dont_warn_on_size=_syntax.patch (boo#1191816) ==== mpg123 ==== Version update (1.29.1 -> 1.29.2) - Update to version 1.29.2 * libmpg123: Fix non-live-decoder safeguard for mpg123_framebyframe_decode() (was a no-op in practice). ==== ncurses ==== Version update (6.2.20211002 -> 6.3.20211021) Subpackages: libncurses6 ncurses-utils terminfo-base - Update to ncurses 6.3 (patch 20211021) + update release notes + add "ncu2openbsd" script, to illustrate how to update an OpenBSD system to use a current ncurses release. - Add upstream keyring to verify source signatures of both ncurses and tack tar ball with their ASC (armored ASCii signature) counterpart - Add ncurses patch 20211018 + check for screen size-change in scr_init() and scr_restore(), in case a screen dump does not match the current screen dimensions (report by Frank Tkalcevic). - Add ncurses patch 20211017 + amend change for pkg-config to account for "none" being returned in the libdir-path result rather than "no" (report by Gabriele Balducci). - Add ncurses patch 20211016 + build-fix for pmake with libtool. + improve make-tar.sh scripts, adding COPYING to tar file, and clean up shellcheck warnings. + add link for "reset6" manpage in test-package ncurses6-doc + revise configure option --with-pkg-config-libdir, using the actual search path from pkg-config or pkgconf using the output from --debug (report by Pascal Pignard). + freeze ABI in ".map" files. - Correct offsets of patch ncurses-6.2.dif - Add ncurses patch 20211009 + implement "+m" option in tabs program. + fill in some details for infoton -TD + fix spelling/consistency in several descriptions -TD + use vt420+lrmm in vt420 -TD + modify save_tty_settings() to avoid opening /dev/tty for cases other than reset/init, e.g., for clear. + modify output of "toe -as" to show first description found rather than the last. + improve tic checks for number of parameters of smglp, smgrp, smgtp, and smgbp (cf: 20020525). + correct off-by-one comparison in last_char(), which did not allow special case of ":" in a terminfo description field (cf: 20120407). + remove check in tic that assumes that none or both parameterized and non-parameterized margin-setting capabilities are present (cf: 20101002). ==== parted ==== - BuildRequire python3-base: Fix execution of test suite. Otherwise we fail with ./t0282-gpt-move-backup.sh: /usr/bin/python3: bad interpreter: No such file or directory. - run checks during build - added patches: tests-disable.patch ==== pcre2 ==== Version update (10.37 -> 10.38) Subpackages: libpcre2-16-0 libpcre2-8-0 - pcre2 10.38: * Following Perl's lead, \K is now locked out in lookaround assertions by default, but an option is provided to re-enable the previous behaviour ==== plasma5-openSUSE ==== Subpackages: plasma5-defaults-openSUSE plasma5-theme-openSUSE sddm-theme-openSUSE - Update to 5.23.2 ==== podman ==== Version update (3.3.1 -> 3.4.1) Subpackages: podman-cni-config - Update to version 3.4.1: * Bugfixes - Fixed a bug where podman machine init could, under some circumstances, create invalid machine configurations which could not be started (#11824). - Fixed a bug where the podman machine list command would not properly populate some output fields. - Fixed a bug where podman machine rm could leave dangling sockets from the removed machine (#11393). - Fixed a bug where podman run --pids-limit=-1 was not supported (it now sets the PID limit in the container to unlimited) (#11782). - Fixed a bug where podman run and podman attach could throw errors about a closed network connection when STDIN was closed by the client (#11856). - Fixed a bug where the podman stop command could fail when run on a container that had another podman stop command run on it previously. - Fixed a bug where the --sync flag to podman ps was nonfunctional. - Fixed a bug where the Windows and OS X remote clients' podman stats command would fail (#11909). - Fixed a bug where the podman play kube command did not properly handle environment variables whose values contained an = (#11891). - Fixed a bug where the podman generate kube command could generate invalid annotations when run on containers with volumes that use SELinux relabelling (:z or :Z) (#11929). - Fixed a bug where the podman generate kube command would generate YAML including some unnecessary (set to default) fields (e.g. user and group, entrypoint, default protocol for forwarded ports) (#11914, #11915, and #11965). - Fixed a bug where the podman generate kube command could, under some circumstances, generate YAML including an invalid targetPort field for forwarded ports (#11930). - Fixed a bug where rootless Podman's podman info command could, under some circumstances, not read available CGroup controllers (#11931). - Fixed a bug where podman container checkpoint --export would fail to checkpoint any container created with --log-driver=none (#11974). * API - Fixed a bug where the Compat Create endpoint for Containers could panic when no options were passed to a bind mount of tmpfs (#11961). - Update to version 3.4.0: * Features - Pods now support init containers! Init containers are containers which run before the rest of the pod starts. There are two types of init containers: "always", which always run before the pod is started, and "once", which only run the first time the pod starts and are subsequently removed. They can be added using the podman create command's --init-ctr option. - Support for init containers has also been added to podman play kube and podman generate kube - init containers contained in Kubernetes YAML will be created as Podman init containers, and YAML generated by Podman will include any init containers created. - The podman play kube command now supports building images. If the --build option is given and a directory with the name of the specified image exists in the current working directory and contains a valid Containerfile or Dockerfile, the image will be built and used for the container. - The podman play kube command now supports a new option, --teardown, which removes any pods and containers created by the given Kubernetes YAML. - The podman generate kube command now generates annotations for SELinux mount options on volume (:z and :Z) that are respected by the podman play kube command. - A new command has been added, podman pod logs, to return logs for all containers in a pod at the same time. - Two new commands have been added, podman volume export (to export a volume to a tar file) and podman volume import) (to populate a volume from a given tar file). - The podman auto-update command now supports simple rollbacks. If a container fails to start after an automatic update, it will be rolled back to the previous image and restarted again. - Pods now share their user namespace by default, and the podman pod create command now supports the --userns option. This allows rootless pods to be created with the --userns=keep-id option. - The podman pod ps command now supports a new filter with its --filter option, until, which returns pods created before a given timestamp. - The podman image scp command has been added. This command allows images to be transferred between different hosts. - The podman stats command supports a new option, --interval, to specify the amount of time before the information is refreshed. - The podman inspect command now includes ports exposed (but not published) by containers (e.g. ports from --expose when --publish-all is not specified). - The podman inspect command now has a new boolean value, Checkpointed, which indicates that a container was stopped as a result of a podman container checkpoint operation. - Volumes created by podman volume create now support setting quotas when run atop XFS. The size and inode options allow the maximum size and maximum number of inodes consumed by a volume to be limited. - The podman info command now outputs information on what log drivers, network drivers, and volume plugins are available for use (#11265). - The podman info command now outputs the current log driver in use, and the variant and codename of the distribution in use. - The parameters of the VM created by podman machine init (amount of disk space, memory, CPUs) can now be set in containers.conf. - The podman machine ls command now shows additional information (CPUs, memory, disk size) about VMs managed by podman machine. - The podman ps command now includes healthcheck status in container state for containers that have healthchecks (#11527). * Changes - The podman build command has a new alias, podman buildx, to improve compatibility with Docker. We have already added support for many docker buildx flags to podman build and aim to continue to do so. - Cases where Podman is run without a user session or a writable temporary files directory will now produce better error messages. - The default log driver has been changed from file to journald. The file driver did not properly support log rotation, so this should lead to a better experience. If journald is not available on the system, Podman will automatically revert to the file. - Podman no longer depends on ip for removing networks (#11403). - The deprecated --macvlan flag to podman network create now warns when it is used. It will be removed entirely in the Podman 4.0 release. - The podman machine start command now prints a message when the VM is successfully started. - The podman stats command can now be used on containers that are paused. - The podman unshare command will now return the exit code of the command that was run in the user namespace (assuming the command was successfully run). - Successful healthchecks will no longer add a healthy line to the system log to reduce log spam. - As a temporary workaround for a lack of shortname prompts in the Podman remote client, VMs created by podman machine now default to only using the docker.io registry. * Bugfixes - Fixed a bug where whitespace in the definition of sysctls (particularly default sysctls specified in containers.conf) would cause them to be parsed incorrectly. - Fixed a bug where the Windows remote client improperly validated volume paths (#10900). - Fixed a bug where the first line of logs from a container run with the journald log driver could be skipped. - Fixed a bug where images created by podman commit did not include ports exposed by the container. - Fixed a bug where the podman auto-update command would ignore the io.containers.autoupdate.authfile label when pulling images (#11171). - Fixed a bug where the --workdir option to podman create and podman run could not be set to a directory where a volume was mounted (#11352). - Fixed a bug where systemd socket-activation did not properly work with systemd-managed Podman containers (#10443). - Fixed a bug where environment variable secrets added to a container were not available to exec sessions launched in the container. - Fixed a bug where rootless containers could fail to start the rootlessport port-forwarding service when XDG_RUNTIME_DIR was set to a long path. - Fixed a bug where arguments to the --systemd option to podman create and podman run were case-sensitive (#11387). - Fixed a bug where the podman manifest rm command would also remove images referenced by the manifest, not just the manifest itself (#11344). - Fixed a bug where the Podman remote client on OS X would not function properly if the TMPDIR environment variable was not set (#11418). - Fixed a bug where the /etc/hosts file was not guaranteed to contain an entry for localhost (this is still not guaranteed if --net=host is used; such containers will exactly match the host's /etc/hosts) (#11411). - Fixed a bug where the podman machine start command could print warnings about unsupported CPU features (#11421). - Fixed a bug where the podman info command could segfault when accessing cgroup information. - Fixed a bug where the podman logs -f command could hang when a container exited (#11461). - Fixed a bug where the podman generate systemd command could not be used on containers that specified a restart policy (#11438). - Fixed a bug where the remote Podman client's podman build command would fail to build containers if the UID and GID on the client were higher than 65536 (#11474). - Fixed a bug where the remote Podman client's podman build command would fail to build containers if the context directory was a symlink (#11732). - Fixed a bug where the --network flag to podman play kube was not properly parsed when a non-bridge network configuration was specified. - Fixed a bug where the podman inspect command could error when the container being inspected was removed as it was being inspected (#11392). - Fixed a bug where the podman play kube command ignored the default pod infra image specified in containers.conf. - Fixed a bug where the --format option to podman inspect was nonfunctional under some circumstances (#8785). - Fixed a bug where the remote Podman client's podman run and podman exec commands could skip a byte of output every 8192 bytes (#11496). - Fixed a bug where the podman stats command would print nonsensical results if the container restarted while it was running (#11469). - Fixed a bug where the remote Podman client would error when STDOUT was redirected on a Windows client (#11444). - Fixed a bug where the podman run command could return 0 when the application in the container exited with 125 (#11540). - Fixed a bug where containers with --restart=always set using the rootlessport port-forwarding service could not be restarted automatically. - Fixed a bug where the --cgroups=split option to podman create and podman run was silently discarded if the container was part of a pod. - Fixed a bug where the podman container runlabel command could fail if the image name given included a tag. - Fixed a bug where Podman could add an extra 127.0.0.1 entry to /etc/hosts under some circumstances (#11596). - Fixed a bug where the remote Podman client's podman untag command did not properly handle tags including a digest (#11557). - Fixed a bug where the --format option to podman ps did not properly support the table argument for tabular output. - Fixed a bug where the --filter option to podman ps did not properly handle filtering by healthcheck status (#11687). - Fixed a bug where the podman run and podman start --attach commands could race when retrieving the exit code of a container that had already been removed resulting in an error (e.g. by an external podman rm -f) (#11633). - Fixed a bug where the podman generate kube command would add default environment variables to generated YAML. - Fixed a bug where the podman generate kube command would add the default CMD from the image to generated YAML (#11672). - Fixed a bug where the podman rm --storage command could fail to remove containers under some circumstances (#11207). - Fixed a bug where the podman machine ssh command could fail when run on Linux (#11731). - Fixed a bug where the podman stop command would error when used on a container that was already stopped (#11740). - Fixed a bug where renaming a container in a pod using the podman rename command, then removing the pod using podman pod rm, could cause Podman to believe the new name of the container was permanently in use, despite the container being removed (#11750). * API - The Libpod Pull endpoint for Images now has a new query parameter, quiet, which (when set to true) suppresses image pull progress reports (#10612). - The Compat Events endpoint now includes several deprecated fields from the Docker v1.21 API for improved compatibility with older clients. - The Compat List and Inspect endpoints for Images now prefix image IDs with sha256: for improved Docker compatibility (#11623). - The Compat Create endpoint for Containers now properly sets defaults for healthcheck-related fields (#11225). - The Compat Create endpoint for Containers now supports volume options provided by the Mounts field (#10831). - The Compat List endpoint for Secrets now supports a new query parameter, filter, which allows returned results to be filtered. - The Compat Auth endpoint now returns the correct response code (500 instead of 400) when logging into a registry fails. - The Version endpoint now includes information about the OCI runtime and Conmon in use (#11227). - Fixed a bug where the X-Registry-Config header was not properly handled, leading to errors when pulling images (#11235). - Fixed a bug where invalid query parameters could cause a null pointer dereference when creating error messages. - Logging of API requests and responses at trace level has been greatly improved, including the addition of an X-Reference-Id header to correlate requests and responses (#10053). * Misc - Updated Buildah to v1.23.0 - Updated the containers/storage library to v1.36.0 - Updated the containers/image library to v5.16.0 - Updated the containers/common library to v0.44.0 ==== polkit ==== Subpackages: typelib-1_0-Polkit-1_0 - fork libpolkit0 package into libpolkit-agent-1-0 and libpolkit-gobject-1-0 as mandated. bsc#1191781 ==== python-Mako ==== Version update (1.1.4 -> 1.1.5) - update to 1.1.5: * Fixed some issues with running the test suite which would be revealed by running tests in random order. - Remove obsolete %suse_version %if - Added BuildRequires: alts - Use libalternatives instead of update-alternatives. ==== python-cryptography ==== Version update (3.3.2 -> 3.4.8) - Add disable-RustExtension.patch in order to avoid a build requirement setuptools_rust - Next version (35.0) needs a full Rust toolchain. - Clean runtime, build and test requirements - Disable python2 build: Not supported anymore - update to 3.4.8 - keep new rust support disabled for now to avoid new dependencies ==== python-jsonpatch ==== - Fix requirements - Added BuildRequires: alts - Use libalternatives instead of update-alternatives. ==== python-numpy ==== - The update- and libalternatives logic is required in the standard build, not the hpc flavor - Use libalternatives instead of update-alternatives. ==== python-pandas ==== Version update (1.3.3 -> 1.3.4) - Update to version 1.3.4 * Fixed regression in DataFrame.convert_dtypes() incorrectly converts byte strings to strings (GH43183) * Fixed regression in GroupBy.agg() where it was failing silently with mixed data types along axis=1 and MultiIndex (GH43209) * Fixed regression in merge() with integer and NaN keys failing with outer merge (GH43550) * Fixed regression in DataFrame.corr() raising ValueError with method="spearman" on 32-bit platforms (GH43588) * Fixed performance regression in MultiIndex.equals() (GH43549) * Fixed performance regression in GroupBy.first() and GroupBy.last() with StringDtype (GH41596) * Fixed regression in Series.cat.reorder_categories() failing to update the categories on the Series (GH43232) * Fixed regression in Series.cat.categories() setter failing to update the categories on the Series (GH43334) * Fixed regression in read_csv() raising UnicodeDecodeError exception when memory_map=True (GH43540) * Fixed regression in DataFrame.explode() raising AssertionError when column is any scalar which is not a string (GH43314) * Fixed regression in Series.aggregate() attempting to pass args and kwargs multiple times to the user supplied func in certain cases (GH43357) * Fixed regression when iterating over a DataFrame.groupby.rolling object causing the resulting DataFrames to have an incorrect index if the input groupings were not sorted (GH43386) * Fixed regression in DataFrame.groupby.rolling.cov() and DataFrame.groupby.rolling.corr() computing incorrect results if the input groupings were not sorted (GH43386) * Fixed bug in pandas.DataFrame.groupby.rolling() and pandas.api.indexers.FixedForwardWindowIndexer leading to segfaults and window endpoints being mixed across groups (GH43267) * Fixed bug in GroupBy.mean() with datetimelike values including NaT values returning incorrect results (GH43132) * Fixed bug in Series.aggregate() not passing the first args to the user supplied func in certain cases (GH43357) * Fixed memory leaks in Series.rolling.quantile() and Series.rolling.median() (GH43339) ==== python38 ==== - BuildRequire rpm-build-python: The provider to inject python(abi) has been moved there. rpm-build pulls rpm-build-python automatically in when building anything against python3-base, but this implies that the initial build of python3-base does not trigger the automatic installation. ==== python38-core ==== Subpackages: libpython3_8-1_0 python38-base - BuildRequire rpm-build-python: The provider to inject python(abi) has been moved there. rpm-build pulls rpm-build-python automatically in when building anything against python3-base, but this implies that the initial build of python3-base does not trigger the automatic installation. ==== qca-qt5 ==== Subpackages: libqca-qt5-2 - Set LD_LIBRARY_PATH before running tests. ==== rpm ==== Version update (4.16.1.3 -> 4.17.0) - update to rpm-4.17.0 - dropped support for berkeley db - archive unpacking failures no longer leave garbage - unified built-in and user-define macro syntax and calling conventions - python generators and debuginfo extraction has been split into a separate upstream project - support for ed25519 signatures - easier rpm macro access in lua - new patches: * python-rpm-packaging.diff * singlefilemode.diff * verbosearg.diff - modified patches: * usr-lib-sysimage-rpm.patch * localetag.diff * brp.diff * findlang.diff * macrosin.diff * rpmqpack.diff * build.diff * whatrequires-doc.diff * remove-brp-strips.diff * fileattrs.diff * langnoc.diff * find-lang-qt-qm.patch * findsupplements.diff * finddebuginfo.diff * finddebuginfo-absolute-links.diff * debugsubpkg.diff * debuglink.diff * debuginfo-mono.patch - dropped patches: * db.diff * dbfsync.diff * dbprivate.diff * dwarf5.diff * ndbglue.diff * pythondistdeps.diff * suspendlock.diff * taggedfileindex.diff * waitlock.diff * add-dwz-single-file-mode-option.patch ==== rpm-config-SUSE ==== Version update (0.g83 -> 0.g89) - Update to version 0.g89: * find-provides.ksyms: Do not set IFS - it is not needed for anything. * find-provides.ksyms: Fix compressed modules. * Allow locale directory to be named "locales" too ==== suse-module-tools ==== Version update (16.0.11 -> 16.0.13) - Update to version 16.0.13: * fixup "rpm-script: fix bad exit status in OpenQA (bsc#1191922)" - Update to version 16.0.12: * rpm-script: fix bad exit status in OpenQA (bsc#1191922) * cert-script: Deal with existing $cert.delete file (bsc#1191804). * cert-script: Ignore kernel keyring for kernel certificates (bsc#1191480). * cert-script: Only print mokutil output in verbose mode. ==== systemd-rpm-macros ==== - Use %{load:} instead of %{?load:}: fix build with RPM 4.17. ==== transactional-update ==== Version update (3.5.6 -> 3.6.0) Subpackages: dracut-transactional-update libtukit0 transactional-update-zypp-config tukit - Version 3.6.0 - Simplify mount hierarchy by just using a single slave bind mount as the root of the update environment; this may avoid the error messages of failed unmounts May fix [boo#1191945] - Version 3.5.7 Various fixes affecting Salt support: - t-u: Don't squash stderr messages into stdout - t-u: Correctly handle case when the snapshot has been deleted due to using --drop-if-no-change: Don't show reboot messages and avoid an awk error message [bsc#1191475] - tukit: Make inotify handler less sensitive / ignore more directories [bsc#1191475] ==== u-boot-rpiarm64 ==== Subpackages: u-boot-rpiarm64-doc Patch queue updated from https://github.com/openSUSE/u-boot.git tumbleweed-2021.10 * Patches added: 0015-Enable-EFI-and-ISO-partitions-suppo.patch - boo#1191966 0016-Revert-video-backlight-fix-pwm-s-du.patch - boo#1187573