Digitainer 0.8

[masterpete]

Hallo,

da ich noch 2 Digitainer habe, wollte ich diese auf 0.8 umrüsten, um auf allen VDRs 0.8 zu haben.

Also DVD rein und GO

Die HDD habe ich manuell gelöscht und anschließend eine automatische Installation gemacht.

Nach dem reboot habe ich ausgewählt, dass ich ein Digitainer habe und ich daher kein X+xinelibout haben möchte.

Nach erneuten Reboot kam wieder der gewohnte Bildschirm Press F1-F4 for shell and F10 to get back here oder so.

Ich erwartete mit Spannung das TV Bild ... es kam nichts...


Indianer im Anhang - hat einer eine Idee

[MFG]

Moin moin masterpete,

mit *tainer und softdevice leider keine Erfahrung, der Punkt wo softdevice aussteigt ist wohl:

Code:

Aug  7 14:23:16 (none) vdr: [21472] [softdevice-audio] Playback open error: default, Datei oder Verzeichnis nicht gefunden FATAL exiting

MfG.
        MFG.

[masterpete]

ein kopieren der alten asounf.conf brachte schonmal nix

[MFG]

Moin moin masterpete,

warte ja noch dass sich ein *tainer-Wissender einschaltet,
hab leider den Verdacht, dass alsa mal aktualisiert wurde,
aber dann nicht softdevice und/oder der VDR noch mal durchgemaked wurde  :-\

MfG.
        MFG.

[masterpete]

*push*
montags müssen die Digitainer-pros ja wieder hier rein schauen

@MFG wenn du vllt doch weiterhelfen kannst - nur zu! 

[Webs]

Hallo,


ich habe genau das gleiche Problem und die gleiche Fehlermeldung.... zusätzlich habe ich folgende Info im Log gefunden:

Aug 10 21:07:04 (none) vdr: [7358] ERROR: unknown config parameter: softdevice.AlsaDevice = default


Anschließend kommt:

Aug 10 21:08:15 (none) vdr: [12495] [softdevice-audio] Opening alsa device default
Aug 10 21:08:15 (none) vdr: [12495] [softdevice-audio] Using alsa AC3 device hw:0,1
Aug 10 21:08:15 (none) vdr: [12495] [softdevice-audio] Playback open error: default, Datei oder Verzeichnis nicht gefunden FATAL exiting


Ich bin dabei meinen Digitainer von DVB-S auf DVB-C umzustellen und habe dafür zur Version 0.8 gegriffen.


Irgendjemand eine Idee?


Viele Grüße

[Nosti]

na da bin ich aber mal gespannt!!

-> digitainer mit PVR unterstützung in der 0.8. ??

[masterpete]

Leider hat noch keiner ne glorreiche Idee

[prudentis]

*push*

[Webs]

Hallo,


hat immer noch keiner eine Idee, woran es liegen könnte?


Wenn wir das Problem eingrenzen können, ist die Lösung vermutlich nicht mehr weit. Liegt es am Softdevice?


Please help... oder gebt uns zumindest einen Hinweis, wo genau das Problem liegt.

[Dr Jones]

Jepp,

habe 2 Digis im Einsatz und werkle immer noch mit 0.6 rum. Wäre schon toll, wenn der Digi TS-Format lesen und schreiben könnte!

Grüße
Dr Jones

[masterpete]

wenn man in der sysconfig

Code:

\"-Psoftdevice -ao alsa:pcm=default -vo dfb:triple:cle266:viatv \"

löscht startet der VDR auf jeden Fall schon mal...

ich teste weiter

[Dr Jones]

wenn man in der sysconfig

Code:

\"-Psoftdevice -ao alsa:pcm=default -vo dfb:triple:cle266:viatv \"

löscht startet der VDR auf jeden Fall schon mal...

ich teste weiter

Damit hast Du leider NUR einen Ausfnahmevdr keinen Ausgabevdr...
Also scheint es an softdevice bzw der Hardwarebeschleunigung (cle266), dfb, viatv zu liegen....

Was passiert, wenn Du den Befehl auf

Code:

-Psoftdevice -ao alsa:pcm=default -vo dfb:viatv \

änderst?


Grüße
Dr Jones

[masterpete]

bringt keine besserung

[Nosti]

nabend,

ich reih mich mal ein in die versuchs digitainer...

[Nosti]

ich sehe grade verschiedene easyinfos durch und bei der 0.8.0 fällt mir das immer wieder auf:

Aug 26 23:56:54 (none) vdr: [7521] loading plugin: /usr/vdr/plugins/libvdr-epgsearch.so.1.7.0
Aug 26 23:56:54 (none) vdr: [7521] loading plugin: /usr/vdr/plugins/libvdr-yacoto.so.1.7.0
Aug 26 23:56:54 (none) vdr: [7521] loading plugin: /usr/vdr/plugins/libvdr-setup.so.1.7.0
Aug 26 23:56:54 (none) vdr: [7521] loading /etc/vdr/setup.conf
Aug 26 23:56:54 (none) vdr: [7521] ERROR: unknown config parameter: softdevice.AlsaDevice = default
Aug 26 23:56:54 (none) vdr: [7521] loading /etc/vdr/sources.conf
Aug 26 23:56:54 (none) vdr: [7521] loading /etc/vdr/diseqc.conf
Aug 26 23:56:54 (none) vdr: [7521] loading /etc/vdr/channels.conf
Aug 26 23:56:54 (none) vdr: [7521] loading /etc/vdr/commands.conf.de_DE
Aug 26 23:56:54 (none) vdr: [7521] loading /etc/vdr/reccmds.conf.de_DE
Aug 26 23:56:54 (none) vdr: [7521] loading /etc/vdr/timercmds.conf.de_DE
Aug 26 23:56:54 (none) vdr: [7521] loading /etc/vdr/svdrphosts.conf
Aug 26 23:56:54 (none) vdr: [7521] loading /etc/vdr/remote.conf
Aug 26 23:56:54 (none) vdr: [7521] loading /etc/vdr/keymacros.conf
Aug 26 23:56:54 (none) vdr: [7521] ERROR: unknown plugin 'hdmonitor'
Aug 26 23:56:54 (none) vdr: [7521] ERROR: empty key macro
Aug 26 23:56:54 (none) vdr: [7521] ERROR: unknown plugin 'music'
Aug 26 23:56:54 (none) vdr: [7521] ERROR: empty key macro
Aug 26 23:56:54 (none) vdr: [7521] ERROR: unknown plugin 'osdteletext'
Aug 26 23:56:54 (none) vdr: [7521] ERROR: empty key macro
Aug 26 23:56:54 (none) vdr: [7521] ERROR: unknown plugin 'sport'
Aug 26 23:56:54 (none) vdr: [7521] ERROR: empty key macro
Aug 26 23:56:54 (none) vdr: [7521] ERROR: unknown plugin 'weatherng'
Aug 26 23:56:54 (none) vdr: [7521] ERROR: empty key macro
Aug 26 23:56:57 (none) vdr: [7533] video directory scanner thread started (pid=7533, tid=7533)
Aug 26 23:56:57 (none) vdr: [7534] video directory scanner thread started (pid=7534, tid=7534)
Aug 26 23:56:57 (none) vdr: [7521] no DVB device found
Aug 26 23:56:57 (none) vdr: [7533] video directory scanner thread ended (pid=7533, tid=7533)
Aug 26 23:56:57 (none) vdr: [7534] video directory scanner thread ended (pid=7534, tid=7534)
Aug 26 23:56:57 (none) vdr: [7521] initializing plugin: softdevice (0.5.0): Software-AusgabegerÀt
Aug 26 23:56:57 (none) vdr: [7521] [dfb] init



zumindestens steht das mehr fach drin, er läd und endläd auch ständig die tvkarte (PVR150):

Aug 26 23:58:11 (none) Runvdr: DVB: Loading <ivtv >
Aug 26 23:58:11 (none) kernel: [  135.612000] Linux video capture interface: v2.00
Aug 26 23:58:11 (none) kernel: [  135.728747] ivtv: Start initialization, version 1.4.1
Aug 26 23:58:11 (none) kernel: [  135.729341] ivtv0: Initializing card 0
Aug 26 23:58:11 (none) kernel: [  135.729355] ivtv0: Autodetected Hauppauge card (cx23416 based)
Aug 26 23:58:11 (none) kernel: [  135.729488] ivtv 0000:00:08.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Aug 26 23:58:11 (none) kernel: [  135.807489] tveeprom 0-0050: Hauppauge model 26709, rev F0C1, serial# 9585603
Aug 26 23:58:11 (none) kernel: [  135.807498] tveeprom 0-0050: tuner model is Philips FQ1216LME MK5 (idx 121, type 80)
Aug 26 23:58:11 (none) kernel: [  135.807504] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
Aug 26 23:58:11 (none) kernel: [  135.807510] tveeprom 0-0050: audio processor is CX25843 (idx 37)
Aug 26 23:58:11 (none) kernel: [  135.807514] tveeprom 0-0050: decoder processor is CX25843 (idx 30)
Aug 26 23:58:11 (none) kernel: [  135.807518] tveeprom 0-0050: has no radio
Aug 26 23:58:11 (none) kernel: [  135.807524] ivtv0: Autodetected Hauppauge WinTV PVR-150
Aug 26 23:58:11 (none) kernel: [  135.835083] cx25840 0-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0)
Aug 26 23:58:11 (none) kernel: [  136.028800] tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
Aug 26 23:58:11 (none) kernel: [  136.067640] tda9887 0-0043: creating new instance
Aug 26 23:58:11 (none) kernel: [  136.067648] tda9887 0-0043: tda988[5/6/7] found
Aug 26 23:58:11 (none) kernel: [  136.083847] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Aug 26 23:58:11 (none) kernel: [  136.125628] wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
Aug 26 23:58:12 (none) kernel: [  136.245216] tuner-simple 0-0061: creating new instance
Aug 26 23:58:12 (none) kernel: [  136.245227] tuner-simple 0-0061: type set to 80 (Philips FQ1216LME MK3 PAL/SECAM w/active loopthrough)
Aug 26 23:58:12 (none) kernel: [  136.249151] ivtv0: Registered device video0 for encoder MPG (4096 kB)
Aug 26 23:58:12 (none) kernel: [  136.249274] ivtv0: Registered device video32 for encoder YUV (2048 kB)
Aug 26 23:58:12 (none) kernel: [  136.249346] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
Aug 26 23:58:12 (none) kernel: [  136.249413] ivtv0: Registered device video24 for encoder PCM (320 kB)
Aug 26 23:58:12 (none) kernel: [  136.249418] ivtv0: Initialized card: Hauppauge WinTV PVR-150
Aug 26 23:58:12 (none) kernel: [  136.249469] ivtv: End initialization
Aug 26 23:58:12 (none) Runvdr: DVB: Loading <ivtvfb >
Aug 26 23:58:12 (none) kernel: [  136.324157] ivtvfb:  no cards found
Aug 26 23:58:12 (none) Runvdr: CLE266-Hardware gefunden setze viafb
Aug 26 23:58:12 (none) Runvdr: starte FBTV
Aug 26 23:58:12 (none) Runvdr: start Lirc both1
.
.
.
(halt die x10)

[masterpete]

Wieso sieht man im start der 06.xx nicht den Eintrag für das Softdevice in der sysconfig.
Ich habe 2 Digitainer und kann ja vergleichen.
Schade, dass fast keiner gute Tips hat...

[Nosti]

in wie weit wäre denn eine ältere version von softdevice unter der 0.8.0 lauffähig?

weil so wie ich das bis jetzt so sehe, könnte das unser problem sein oder?

[masterpete]

Wenn ich wüsste wie man das testen könnte...

[sinai]

Die Source aus der 0.6 (/usr/local/src/VDR/PLUGINS/src) in die 0.8 kopieren, Plugin bauen und testen.

Andy

[masterpete]

magste mich bitte nochmal kurz aufschlauen wohin kopieren und wie bauen - wo muss ich das alte löschen?

Code:

*** failed plugins: graphtft image osdpip reelbox remoteosd skinenigmang skinreel3 softdevice text2skin tvm2vdr xineliboutput yaepghd

[sinai]

http://wiki.easy-vdr.de/index.php/Plugin...on_calc.29

Andy

[masterpete]

Danke

leider kein Erfolg:

Code:

sed: kann ../../../config.h nicht lesen: Datei oder Verzeichnis nicht gefunden
In file included from softdevice.c:8:
softdevice.h:11:27: error: vdr/interface.h: Datei oder Verzeichnis nicht gefunden
softdevice.h:12:24: error: vdr/plugin.h: Datei oder Verzeichnis nicht gefunden
softdevice.h:13:24: error: vdr/player.h: Datei oder Verzeichnis nicht gefunden
In file included from softdevice.h:15,
                 from softdevice.c:8:
i18n.h:12:22: error: vdr/i18n.h: Datei oder Verzeichnis nicht gefunden
In file included from audio.h:14,
                 from softdevice.h:16,
                 from softdevice.c:8:
setup-softdevice.h:14:22: error: vdr/menu.h: Datei oder Verzeichnis nicht gefunden
In file included from softdevice.h:17,
                 from softdevice.c:8:
mpeg2decoder.h:22:28: error: vdr/ringbuffer.h: Datei oder Verzeichnis nicht gefunden
In file included from mpeg2decoder.h:25,
                 from softdevice.h:17,
                 from softdevice.c:8:
video.h:14:24: error: vdr/remote.h: Datei oder Verzeichnis nicht gefunden
In file included from mpeg2decoder.h:27,
                 from softdevice.h:17,
                 from softdevice.c:8:
VideoFilter.h:17:27: error: postprocess.h: Datei oder Verzeichnis nicht gefunden
softdevice.c:15:21: error: vdr/osd.h: Datei oder Verzeichnis nicht gefunden
softdevice.c:16:24: error: vdr/dvbspu.h: Datei oder Verzeichnis nicht gefunden
In file included from softdevice.c:52:
video-dfb.h:21:24: error: vdr/thread.h: Datei oder Verzeichnis nicht gefunden
In file included from softdevice.c:114:
SoftOsd.h:27:24: error: vdr/config.h: Datei oder Verzeichnis nicht gefunden
i18n.h:14: error: ‘tI18nPhrase’ does not name a type
audio.h:42: error: ‘uchar’ has not been declared
audio.h:43: error: ‘uchar’ has not been declared
audio.h:64: error: ‘uchar’ has not been declared
audio.h:65: error: ‘uchar’ has not been declared
sync-timer.h: In constructor ‘cSigTimer::cSigTimer()’:
sync-timer.h:44: error: ‘pthread_mutex_init’ was not declared in this scope
sync-timer.h:45: error: ‘pthread_cond_init’ was not declared in this scope
sync-timer.h: In destructor ‘virtual cSigTimer::~cSigTimer()’:
sync-timer.h:49: error: ‘pthread_cond_broadcast’ was not declared in this scope
sync-timer.h:50: error: ‘pthread_cond_destroy’ was not declared in this scope
sync-timer.h:51: error: ‘pthread_mutex_destroy’ was not declared in this scope
PicBuffer.h: At global scope:
PicBuffer.h:69: error: ‘cMutex’ does not name a type
video.h:40: error: expected class-name before ‘{’ token
video.h: In constructor ‘cSoftRemote::cSoftRemote(const char*)’:
video.h:42: error: class ‘cSoftRemote’ does not have any field named ‘cRemote’
video.h: In member function ‘virtual bool cSoftRemote::PutKey(uint64_t, bool, bool)’:
video.h:46: error: ‘Put’ was not declared in this scope
video.h: At global scope:
video.h:50: error: expected class-name before ‘{’ token
video.h:68: error: ‘cMutex’ does not name a type
video.h: In member function ‘void cVideoOut::GetLockLastPic(sPicBuffer*&)’:
video.h:185: error: ‘oldPictureMutex’ was not declared in this scope
VideoFilter.h: At global scope:
VideoFilter.h:90: error: ISO C++ forbids declaration of ‘pp_mode_t’ with no type
VideoFilter.h:90: error: expected ‘;’ before ‘*’ token
VideoFilter.h:91: error: ISO C++ forbids declaration of ‘pp_context_t’ with no type
VideoFilter.h:91: error: expected ‘;’ before ‘*’ token
mpeg2decoder.h:134: error: expected class-name before ‘{’ token
mpeg2decoder.h:134: warning: ‘class cSoftRingBufferLinear’ has virtual functions but non-virtual destructor
mpeg2decoder.h: In constructor ‘cSoftRingBufferLinear::cSoftRingBufferLinear(int, int, bool)’:
mpeg2decoder.h:137: error: class ‘cSoftRingBufferLinear’ does not have any field named ‘cRingBufferLinear’
mpeg2decoder.h: In member function ‘virtual int cSoftRingBufferLinear::Available()’:
mpeg2decoder.h:140: error: ‘cRingBufferLinear’ has not been declared
mpeg2decoder.h: In member function ‘virtual int cSoftRingBufferLinear::Free()’:
mpeg2decoder.h:141: error: ‘cRingBufferLinear’ has not been declared
mpeg2decoder.h: In member function ‘int cSoftRingBufferLinear::Size()’:
mpeg2decoder.h:142: error: ‘cRingBufferLinear’ has not been declared
mpeg2decoder.h: At global scope:
mpeg2decoder.h:147: error: expected class-name before ‘{’ token
mpeg2decoder.h:161: error: ‘cMutex’ does not name a type
mpeg2decoder.h:267: error: expected class-name before ‘{’ token
mpeg2decoder.h:271: error: ‘cMutex’ does not name a type
mpeg2decoder.h:272: error: ‘cMutex’ does not name a type
mpeg2decoder.h:282: error: ‘cMutex’ does not name a type
mpeg2decoder.h:309: error: ‘offset_t’ has not been declared
mpeg2decoder.h:318: error: expected ‘,’ or ‘...’ before ‘*’ token
mpeg2decoder.h:318: error: ISO C++ forbids declaration of ‘uchar’ with no type
mpeg2decoder.h:319: error: ‘uchar’ has not been declared
mpeg2decoder.h:267: warning: ‘class cMpeg2Decoder’ has virtual functions but non-virtual destructor
softdevice.h:23: error: typedef ‘fQueuePacket’ is initialized (use __typeof__ instead)
softdevice.h:23: error: ‘cDevice’ was not declared in this scope
softdevice.h:23: error: ‘Device’ was not declared in this scope
softdevice.h:23: error: expected primary-expression before ‘*’ token
softdevice.h:23: error: ‘ic’ was not declared in this scope
softdevice.h:23: error: expected primary-expression before ‘&’ token
softdevice.h:23: error: ‘pkt’ was not declared in this scope
softdevice.h:25: error: typedef ‘SoftdeviceHandle’ is initialized (use __typeof__ instead)
softdevice.h:25: error: ‘cDevice’ was not declared in this scope
softdevice.h:25: error: ‘Device’ was not declared in this scope
softdevice.h:25: error: expected primary-expression before ‘int’
softdevice.h:25: error: expected primary-expression before ‘int’
softdevice.h:28: error: ‘fQueuePacket’ does not name a type
softdevice.h:29: error: ‘SoftdeviceHandle’ does not name a type
softdevice.h:30: error: ‘SoftdeviceHandle’ does not name a type
softdevice.h:31: error: ‘SoftdeviceHandle’ does not name a type
softdevice.h:40: error: expected class-name before ‘{’ token
softdevice.h:58: error: ISO C++ forbids declaration of ‘cOsdObject’ with no type
softdevice.h:58: error: ‘cOsdObject’ declared as a ‘virtual’ field
softdevice.h:58: error: expected ‘;’ before ‘*’ token
softdevice.h:59: error: ISO C++ forbids declaration of ‘cMenuSetupPage’ with no type
softdevice.h:59: error: ‘cMenuSetupPage’ declared as a ‘virtual’ field
softdevice.h:59: error: expected ‘;’ before ‘*’ token
softdevice.h:67: error: expected class-name before ‘{’ token
softdevice.h:94: error: ‘ePlayMode’ has not been declared
softdevice.h:101: error: expected ‘,’ or ‘...’ before ‘*’ token
softdevice.h:101: error: ISO C++ forbids declaration of ‘uchar’ with no type
softdevice.h:102: error: ‘cPoller’ has not been declared
softdevice.h:105: error: expected ‘,’ or ‘...’ before ‘*’ token
softdevice.h:105: error: ISO C++ forbids declaration of ‘uchar’ with no type
softdevice.h:107: error: expected ‘,’ or ‘...’ before ‘*’ token
softdevice.h:107: error: ISO C++ forbids declaration of ‘uchar’ with no type
softdevice.h:126: error: expected ‘,’ or ‘...’ before ‘*’ token
softdevice.h:126: error: ISO C++ forbids declaration of ‘cChannel’ with no type
softdevice.h:129: error: ISO C++ forbids declaration of ‘cSpuDecoder’ with no type
softdevice.h:129: error: expected ‘;’ before ‘*’ token
softdevice.h:132: error: ISO C++ forbids declaration of ‘cSpuDecoder’ with no type
softdevice.h:132: error: ‘cSpuDecoder’ declared as a ‘virtual’ field
softdevice.h:132: error: expected ‘;’ before ‘*’ token
softdevice.h:67: warning: ‘class cSoftDevice’ has virtual functions but non-virtual destructor
video-dummy.h:19: error: ‘cBitmap’ has not been declared
video-shm.h:68: error: expected class-name before ‘,’ token
video-shm.h:68: error: expected class-name before ‘{’ token
video-shm.h:68: warning: ‘class cShmRemote’ has virtual functions but non-virtual destructor
video-shm.h: In constructor ‘cShmRemote::cShmRemote(const char*, cShmVideoOut*)’:
video-shm.h:76: error: class ‘cShmRemote’ does not have any field named ‘cRemote’
video-shm.h:79: error: ‘Start’ was not declared in this scope
video-shm.h: In member function ‘void cShmRemote::Stop()’:
video-shm.h:93: error: ‘Cancel’ was not declared in this scope
video-dfb.h: At global scope:
video-dfb.h:94: error: expected class-name before ‘,’ token
video-dfb.h:94: error: expected class-name before ‘{’ token
video-dfb.h:94: warning: ‘class cDFBRemote’ has virtual functions but non-virtual destructor
audio-alsa.h:26: error: ‘cMutex’ does not name a type
audio-alsa.h:46: error: ‘uchar’ has not been declared
audio-alsa.h:47: error: ‘uchar’ has not been declared
audio-oss.h:17: error: ‘cMutex’ does not name a type
audio-oss.h:26: error: ‘uchar’ has not been declared
audio-oss.h:27: error: ‘uchar’ has not been declared
setup-softdevice-menu.h:17: error: expected class-name before ‘{’ token
setup-softdevice-menu.h:22: error: ‘eOSState’ does not name a type
setup-softdevice-menu.h:31: error: expected class-name before ‘{’ token
setup-softdevice-menu.h:36: error: ‘eOSState’ does not name a type
setup-softdevice-menu.h:45: error: expected class-name before ‘{’ token
setup-softdevice-menu.h:50: error: ‘eOSState’ does not name a type
setup-softdevice-menu.h:58: error: expected class-name before ‘{’ token
setup-softdevice-menu.h:61: error: ISO C++ forbids declaration of ‘cPlugin’ with no type
setup-softdevice-menu.h:61: error: expected ‘;’ before ‘*’ token
setup-softdevice-menu.h:64: error: ‘eOSState’ does not name a type
setup-softdevice-menu.h:68: error: expected `)' before ‘*’ token
setup-softdevice-menu.h:58: warning: ‘class cMenuSetupSoftdevice’ has virtual functions but non-virtual destructor
SoftOsd.h:63: error: expected class-name before ‘,’ token
SoftOsd.h:63: error: expected class-name before ‘{’ token
SoftOsd.h:65: error: ‘cMutex’ does not name a type
SoftOsd.h:73: error: ‘cMutex’ does not name a type
SoftOsd.h:87: error: ‘tColor’ has not been declared
SoftOsd.h:87: error: expected ‘,’ or ‘...’ before ‘*’ token
SoftOsd.h:88: error: ISO C++ forbids declaration of ‘tColor’ with no type
SoftOsd.h:111: error: ‘cBitmap’ has not been declared
softdevice.c:116: error: expected class-name before ‘{’ token
softdevice.c:119: error: ISO C++ forbids declaration of ‘cOsd’ with no type
softdevice.c:119: error: expected ‘;’ before ‘*’ token
softdevice.c:122: error: ISO C++ forbids declaration of ‘cOsd’ with no type
softdevice.c:122: error: ‘cOsd’ declared as a ‘virtual’ field
softdevice.c:122: error: expected ‘;’ before ‘*’ token
softdevice.c:123: error: ISO C++ forbids declaration of ‘cOsd’ with no type
softdevice.c:123: error: expected ‘;’ before ‘*’ token
softdevice.c:126: error: expected constructor, destructor, or type conversion before ‘*’ token
softdevice.c: In constructor ‘cSoftOsdProvider::cSoftOsdProvider(cVideoOut*)’:
softdevice.c:128: error: class ‘cSoftOsdProvider’ does not have any field named ‘cOsdProvider’
softdevice.c: At global scope:
softdevice.c:133: error: expected constructor, destructor, or type conversion before ‘*’ token
softdevice.c:139: error: expected constructor, destructor, or type conversion before ‘*’ token
softdevice.c: In constructor ‘cSoftDevice::cSoftDevice(int, int, char*)’:
softdevice.c:150: error: ‘spuDecoder’ was not declared in this scope
softdevice.c:188: error: ‘esyslog’ was not declared in this scope
softdevice.c:257: error: ‘class cVideoOut’ has no member named ‘Start’
softdevice.c:290: error: ‘class cVideoOut’ has no member named ‘Start’
softdevice.c: In member function ‘void cSoftDevice::LoadSubPlugin(char*, char*)’:
softdevice.c:322: error: ‘VDRVERSION’ was not declared in this scope
softdevice.c:340: error: ‘esyslog’ was not declared in this scope
softdevice.c:351: error: ‘dsyslog’ was not declared in this scope
softdevice.c:355: error: ‘esyslog’ was not declared in this scope
softdevice.c:364: error: ‘esyslog’ was not declared in this scope
softdevice.c: At global scope:
softdevice.c:382: error: expected ‘,’ or ‘...’ before ‘*’ token
softdevice.c:382: error: ISO C++ forbids declaration of ‘cChannel’ with no type
softdevice.c:387: error: expected constructor, destructor, or type conversion before ‘*’ token
softdevice.c:405: error: ‘bool cSoftDevice::SetPlayMode’ is not a static member of ‘class cSoftDevice’
softdevice.c:405: error: ‘ePlayMode’ was not declared in this scope
softdevice.c:406: error: expected ‘,’ or ‘;’ before ‘{’ token
softdevice.c: In member function ‘virtual void cSoftDevice::Clear()’:
softdevice.c:454: error: ‘cDevice’ has not been declared
softdevice.c: In member function ‘virtual void cSoftDevice::Play()’:
softdevice.c:461: error: ‘cDevice’ has not been declared
softdevice.c: In member function ‘virtual void cSoftDevice::Freeze()’:
softdevice.c:472: error: ‘cDevice’ has not been declared
softdevice.c: In member function ‘virtual void cSoftDevice::Mute()’:
softdevice.c:481: error: ‘cDevice’ has not been declared
softdevice.c: At global scope:
softdevice.c:490: error: expected ‘,’ or ‘...’ before ‘*’ token
softdevice.c:490: error: ISO C++ forbids declaration of ‘uchar’ with no type
softdevice.c: In member function ‘virtual void cSoftDevice::StillPicture(int)’:
softdevice.c:494: error: expected primary-expression before ‘)’ token
softdevice.c:494: error: ‘Length’ was not declared in this scope
softdevice.c: At global scope:
softdevice.c:497: error: ‘bool cSoftDevice::Poll’ is not a static member of ‘class cSoftDevice’
softdevice.c:497: error: ‘cPoller’ was not declared in this scope
softdevice.c:497: error: ‘Poller’ was not declared in this scope
softdevice.c:497: error: expected primary-expression before ‘int’
softdevice.c:497: error: initializer expression list treated as compound expression
softdevice.c:498: error: expected ‘,’ or ‘;’ before ‘{’ token
softdevice.c:539: error: expected ‘,’ or ‘...’ before ‘*’ token
softdevice.c:539: error: ISO C++ forbids declaration of ‘uchar’ with no type
softdevice.c:613: error: expected ‘,’ or ‘...’ before ‘*’ token
softdevice.c:613: error: ISO C++ forbids declaration of ‘uchar’ with no type
softdevice.c: In member function ‘virtual int cSoftDevice::PlayVideo(int)’:
softdevice.c:623: error: ‘Data’ was not declared in this scope
softdevice.c:623: error: ‘Length’ was not declared in this scope
softdevice.c:625: error: ‘Length’ was not declared in this scope
softdevice.c:627: error: ‘Data’ was not declared in this scope
softdevice.c:630: error: ‘Length’ was not declared in this scope
softdevice.c:632: error: ‘Data’ was not declared in this scope
softdevice.c: In member function ‘virtual const char* cPluginSoftDevice::Description()’:
softdevice.c:798: error: ‘tr’ was not declared in this scope
softdevice.c: In member function ‘virtual const char* cPluginSoftDevice::MainMenuEntry()’:
softdevice.c:803: error: ‘tr’ was not declared in this scope
softdevice.c: In member function ‘virtual bool cPluginSoftDevice::ProcessArgs(int, char**)’:
softdevice.c:918: error: ‘esyslog’ was not declared in this scope
softdevice.c:971: error: ‘esyslog’ was not declared in this scope
softdevice.c:1004: error: ‘esyslog’ was not declared in this scope
softdevice.c:1082: error: ‘esyslog’ was not declared in this scope
softdevice.c:1089: error: ‘esyslog’ was not declared in this scope
softdevice.c: In member function ‘virtual bool cPluginSoftDevice::Start()’:
softdevice.c:1154: error: ‘Phrases’ was not declared in this scope
softdevice.c:1154: error: ‘RegisterI18n’ was not declared in this scope
softdevice.c: At global scope:
softdevice.c:1173: error: expected constructor, destructor, or type conversion before ‘*’ token
softdevice.c:1181: error: expected constructor, destructor, or type conversion before ‘*’ token
softdevice.c:1193: error: expected constructor, destructor, or type conversion before ‘;’ token
make[1]: *** [softdevice.o] Fehler 1

[prudentis]

Na ja, ganz so trivial ist Softdevice dann auch nicht

Ich würde mir mal das: http://www.vdr-wiki.de/wiki/index.php/Softdevice-plugin
und das: http://softdevice.berlios.de/
zu Gemüte führen!

Da ist noch etwas mehr zu machen als nur das Plguin mal eben durch den Kompiler zu jagen

lg prudentis

[MFG]

Moin moin masterpete,

auf jedenfall muss schon mal das Makefile noch angepasst werden, wie hier prudentis aufzeigt ;-]

MfG.
        MFG.