Neuinstallation mit easyVDR stable

[Oberlooser]

Hallo Helmut!

Es muss daher an irgend ein Addon , Einstellungen oder Plugin liegen

Sorry, musste kurzfristig weg!
...sicher dir die Ausgabe von "ls -l /usr/share/vdr/shutdown-hooks" dann kannst
du leichter festellen wo es dann klemmt wenn die Kiste nicht mehr rünterfährt!

P.S

systemd-udevd[11941]: NVIDIA ACPI Video Driver: Process '/bin/systemctl start --no-block nvidia-persistenced.service' failed with exit code 5

kam diese Fehlermeldung erneut nach Neu Install??


Gruss
Wolfgang

Hi Wolfgang
Sorry das ich erst jetzt Antworte . War eine Woche im Urlaub...
Problem mit dem Shutdown ist nach einer Neu installation weg
Hier der syslog
-----------------------------------------------------
-----              ERRORS in syslog            -----
-----------------------------------------------------

Jun 15 18:27:58 Lintec5 systemd[1]: Started ACPI Events Check.
Jun 15 18:27:58 Lintec5 systemd[1]: Condition check resulted in Process error reports when automatic reporting is enabled (file watch) being skipped.
Jun 15 18:27:58 Lintec5 systemd[1]: Started CUPS Scheduler.
--
Jun 15 18:27:58 Lintec5 kernel: [    0.606447] Key type dns_resolver registered
Jun 15 18:27:58 Lintec5 kernel: [    0.606626] RAS: Correctable Errors collector initialized.
Jun 15 18:27:58 Lintec5 kernel: [    0.606667] microcode: sig=0x6fb, pf=0x1, revision=0xba
--
Jun 15 18:27:58 Lintec5 kernel: [    2.735981] systemd[1]: Finished Uncomplicated firewall.
Jun 15 18:27:58 Lintec5 kernel: [    2.739942] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
Jun 15 18:27:58 Lintec5 kernel: [    2.743191] systemd[1]: Finished Remount Root and Kernel File Systems.
--
Jun 15 18:27:58 Lintec5 kernel: [    4.350474] intel_powerclamp: No package C-state available
Jun 15 18:27:58 Lintec5 kernel: [    4.394287] mt352_read_register: readreg error (reg=127, ret==-121)
Jun 15 18:27:58 Lintec5 kernel: [    4.404710] nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -121)
Jun 15 18:27:58 Lintec5 kernel: [    4.404713] nxt200x: Unknown/Unsupported NXT chip: 00 00 00 00 00
Jun 15 18:27:58 Lintec5 kernel: [    4.415323] lgdt330x 1-0059: i2c_read_demod_bytes: addr 0x59 select 0x02 error (ret == -121)
Jun 15 18:27:58 Lintec5 kernel: [    4.431638] stv0297_readreg: readreg error (reg == 0x80, ret == -121)
Jun 15 18:27:58 Lintec5 kernel: [    4.442065] mt312_read: ret == -121
--
Jun 15 18:28:00 Lintec5 kernel: [    8.439280] r8169 0000:03:00.0 enp3s0: Link is Down
Jun 15 18:28:00 Lintec5 NetworkManager[583]:  [1592238480.3393] Error: failed to open /run/network/ifstate
Jun 15 18:28:00 Lintec5 NetworkManager[583]:  [1592238480.3521] modem-manager: ModemManager available
--
Jun 15 18:28:28 Lintec5 systemd-timesyncd[540]: Initial synchronization to time server 91.189.89.198:123 (ntp.ubuntu.com).
Jun 15 18:28:29 Lintec5 pulseaudio[826]: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
Jun 15 18:28:30 Lintec5 systemd[1]: systemd-hostnamed.service: Succeeded.

-----------------------------------------------------
-----              ERRORS in xorg.log          -----
-----------------------------------------------------------------------------------------
Ausgabe von:
[email protected]:/home/easyvdr# ls -l /usr/share/vdr/shutdown-hooks

insgesamt 24
-rwxr-xr-x 1 root root 3321 Apr 28  2018 10_shutdown.acpi
-rwxr-xr-x 1 root root  747 Jan  3 12:02 10_shutdown.custom
-rwxr-xr-x 1 root root  399 Jan  3 12:02 10_shutdown.handbrake-cli
-rwxr-xr-x 1 root root  96 Jan  3 12:02 10_shutdown.logrotate
-rwxr-xr-x 1 root root  520 Jan  3 12:02 10_shutdown.wol
-rwxr-xr-x 1 root root 1427 Jan  3 12:02 11_last_channel_volume

Ich kann nicht sagen woran es lag
Addons und Plugins sind die gleichen..

Gruss Helmut