SMS (Short Message Service)

Receiver Side
To set a cell phone to be receiving notification messages:
Step 1: Right-click on the lower half of the configuration screen, the receiver entry field, to display the add recipient prompt.

Step 2: Enter the Cell Phone Number of the contact receiving event message.

Step 3: Select the severity level of events to be sent to the receivers.
Step 4: Repeat this process to add more receivers.


Sender Side
From the Module Config window:
Step 1: Find the SMS settings from the pull-down list
Step 2: Click on the On/Off switch besides the pull-down button to enable SMS notification.
switched ON switched OFF
Step 3: Set Status to Enable if you want the module to be activated every time the Configuration Client is started. Note that the On/Off switch should also be in the ON position before you turned off the server or closed the utility. Otherwise, you will have to manually enable the function.
Step 4: Select the severity level of events to be sent to the receiver station.
Step 5: Select the COM port where you connect your GMS modem.
Setp 6: Enter the four-digit identification Pin Code required by the modem.
Step 7: Provide a Send Period in milliseconds for time intervals between messages sent.
Step 8: Provide a retry time value.


Back to Configuration Client page