Dear Infortrend customer, This is a release notification for firmware version 3.23 using with Infortrend RAID controller series. This firmware can be apply to the following Infortrend RAID controllers: SentinelRAID 2000 SentinelRAID 1500/1500E SentinelRAID 2500/2500E SentinelRAID 2000R1/R2/R3 SentinelRAID 2500R1/R2/R3 SentinelRAID 2500R5/R6 EonRAID 2000 EonRAID 2000R1/R2/R5/R6 SentinelRAID 100 SentinelRAID 150 * * * IMPORTANT * * * 1. For all controllers (excluding SentinelRAID 100 and SentinelRAID 150), please upgrade to this latest 3.23 firmware directly. (No need to use the "Bridge" firmware.) 2. For SentinelRAID 100 and 150 with firmware earlier than 3.23i, upgrade to "Bridge" firmware first, then upgrade to the latest 3.23 firmware. (The "Bridge" firmware can be found in the same ftp directory.) 3. For SentinelRAID 100 and 150 with firmware 3.23i or later (newer), please upgrade to this latest 3.23 version directly. (No need to use the "Bridge firmware.) ******************* NOTICE ************************ Please refer to "Generic Operation Manual Revision 1.4" for new features and functions provided in firmware 3.23. *************************************************** Please contact us if you have any question when upgrading to this firmware release, thank you. File contents in "f32a323w.ZIP" (ZIP file): f32a323w firmware 3.23w binary b32a121f boot record 1.21f binary release.fw Release Note for this firmware release release.br Release Note for this boot record release Please contact us if you have any question when upgrading to this firmware release, thank you. Best regards, Infortrend Technical Support -------------- Contact Information ---------------- For Americas: support@infortrend.com ftp.infortrend.com www.infortrend.com For Europe (EMEA): support@infortrend-europe.com ftp.infortrend-europe.com www.infortrend-europe.com For China: support@infortrend.cn ftp.infortrend.cn www.infortrend.cn For Asia Pacific and Other Areas: support@infortrend.com.tw ftp.infortrend.com.tw www.infortrend.com.tw