Themabewertung:
  • 0 Bewertung(en) - 0 im Durchschnitt
  • 1
  • 2
  • 3
  • 4
  • 5
Kein EPG für Sat1 Pro7 &co.
#1
Kein EPG für Sat1 Pro7 &co.
Frage Steht oben. HAtte das schonmal weis leider nicht mehr was ich gemacht hatte Smile. VDR ist neuistalliert worden. Das ist seit ca. 5 Tagen so das das EPG von Pro7 RTL und Co fehlt. Ard hats Problemlos.
Fallen euch in der Datei gleich noch weitere Fehler auf?


Angehängte Dateien
.zip   easyinfo.zip (Größe: 79,76 KB / Downloads: 2)
easyVDR-Version:2.1.0-Stable easyVDR-Installations-DVD:easyVDR-2.0-Desktop - 32 Bit VDR-Version: 2.0.6 Kernel-Version: 3.13.0-49-generic
Mainboard: FUJITSU SIEMENS D1567 CPU: Intel® Pentium® 4 CPU 2.80GHz CPU Frequency: 2.792852GHz Memory: 1.53 GB Hard Disk: WDC WD5000AAVS-0 Optical Drives: HL-DT-ST DVDRAM GSA-H12N Network Card: Intel 82547EI Gigabit Ethernet Controller Graphics Card: Intel Corporation 82865G Integrated Graphics Controller (rev 02) Sound Card: Intel 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller TV Card: Hauppauge Nova-S-Plus DVB-S
"Wiedergabe": XBMC auf Raspberry Pi Model B+ Mainboard (GPIO polig, MicroSD Speicherkartenslot, HDMI, 4x USB 2.0) XBMC auf Windows XBMC auf Fire TV Stick
Zitieren
#2
Ja.

/video0: Datei oder Verzeichnis nicht gefunden
Zitieren
#3
Hi,

du hast immer noch den gleichen Fehler wie hier -> VDR Startert nicht (Dein VDR läuft nicht)
Code:
Oct 16 19:35:11 easyVDR vdr: [6835] ERROR (tools.c,392): /video0: Datei oder Verzeichnis nicht gefunden
Oct 16 19:35:11 easyVDR easyvdr-runvdr: VDR died within 10 seconds, this happened 1 time(s).
Oct 16 19:35:11 easyVDR easyvdr-runvdr: Terminating by error level 2
Oct 16 19:35:11 easyVDR kernel: [ 1050.975005] init: easyvdr-vdr main process ended, respawning
wenn kein "/video0" kann VDR nicht gestartet werden.

Code:
#####################################################
##### fdisk -l   
#####################################################


Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0009aef0

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048   975218687   487608320   83  Linux
/dev/sda2       975220734   976771071      775169    5  Extended
/dev/sda5       975220736   976771071      775168   82  Linux swap / Solaris

Disk /dev/sdb: 30.8 GB, 30752000000 bytes
255 heads, 63 sectors/track, 3738 cylinders, total 60062500 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1              32    60062499    30031234    c  W95 FAT32 (LBA)

#####################################################
##### df -h   
#####################################################

Filesystem      Size  Used Avail Use% Mounted on
/dev/sda1       458G  7.2G  428G   2% /
none            4.0K     0  4.0K   0% /sys/fs/cgroup
udev            357M  4.0K  357M   1% /dev
tmpfs            74M  1.3M   73M   2% /run
none            5.0M     0  5.0M   0% /run/lock
none            370M     0  370M   0% /run/shm
none            100M     0  100M   0% /run/user
/dev/sdb1        29G  1.5G   28G   6% /media/easyvdr01

Gruss
Wolfgang

Zitieren


Gehe zu:


Benutzer, die gerade dieses Thema anschauen: